Machine State:

File:  (SD)
Timelapse:

Approx. Total Print Time:

Print Time:
Print Time Left:
Printed:
Free: / Total:
Upload Upload to SD
Hint: You can also drag and drop files on this page to upload them.
Actual Target Offset
Keyboard controls active
/ : X Axis +/-
/ : Y Axis +/-
W, Page↑ / S, Page↓: Z Axis +/-
Home: Home X/Y
End: Home Z
1, 2, 3, 4: Stepsize 0.1, 1, 10, 100mm
Hint: If you move your mouse over the picture, you enter keyboard control mode.

Scroll to end | Select all

If acknowledgements ("ok"s) sent by the firmware get lost due to issues with the serial communication to your printer, OctoPrint's communication with it can become stuck. If that happens, this can help. Please be advised that such occurences hint at general communication issues with your printer which will probably negatively influence your printing results and which you should therefore try to resolve!

Some functionality of the terminal will be disabled if OctoPrint detects that your browser is too slow for that. You may force it back on here, but be aware that this might make your browser unresponsive.

Take note that timelapse configuration is disabled while your printer is printing.

Timelapse Configuration

Warning Do not use with spiralized ("Joris") vases or similar continuous Z models. Note Does not work when printing from the printer's SD Card (no way to detect the change in Z reliably). Use "Timed" mode for those prints instead.
fps
sec
sec

Finished Timelapses

Name Size Action
 | 
Name Frames Size Action
 | 

Upload locally

Upload to SD
(SD not initialized)

Server is offline

Attempt to reconnect

Please reload

There is a new version of the server active now, a reload of the user interface is needed. This will not interrupt any print jobs you might have ongoing. Please reload the web interface now by clicking the button below.

Reload now